Introduction, modeling and structural analysis

SCADA Pro Analysis

Invest and train in a single application that will meet your needs for any building design with any material and regulations

Brief Description

SCADA Pro Analysis is a complete and comprehensive application for static and dynamic analysis of structures, for reinforced concrete, steel, timber and masonry, according to Eurocodes and most European National Annexes.

Interface

N

New and easy to use ribbon based interface, with navigation tree.

N

Bidirectional mode for selection and modification of structural elements, in tree form or graphically, from the displayed model showing all properties.

N

Display, at the right section of the window, of the properties of each entity for easy reference and editing.

N

Capability of adjustment of the entity’s colors (e.g. columns, beams) as well as the interface according to the user needs.

Download Free Version

Modeling

I

Automatic identification process of cross-sections and creation of the structural physical and mathematical model from a DXF or a DWG file.

I

Unlimited number of nodes, linear and surface finite elements.

I

Rich library of standard steel and mixed structures, with 3D- trusses, frames, 3d surfaces and masonry walls.

I

Complete library of standard profiles of steel, timber, concrete, and arbitrary section profiles.

I

Rich library of masonry units and mortars including the ability for the user to enter custom wall specifications.

I

Unlimited capabilities of simulation for inclined beams, columns with arbitrary section, slabs with openings, shells, silos, mezzanines, swimming pools etc.

I

Input of mixed structures made of concrete, steel, wood.

I

Mixed and different level foundations with footings, beams on elastic foundation, connection beams, aft foundation, with full interaction superstructure – foundation.

I

Mesh generation of surface finite elements automatically, with a single click, with automatic kerning at points of stress concentration. Direct identification and matching of nodes of linear and surface elements.

I

Αυτόματη προσομοίωση των τοιχοπληρώσεων με χιαστί ράβδους.

I

Εμφάνιση μηνυμάτων για πιθανά σφάλματα στη γεωμετρία και στο μοντέλο του φορέα.

I

All the types of linear and surface finite elements are included in order to model any complex structure.

I

Linear Finite Elements: Truss, 3d-beam, 3d-beam on elastic foundation.

I

Surface Finite Elements: Plane Stress, Plane Strain, Axisymmetric, Shell, and Solid Elements.

3D FEM

Download Free Trial

N

A new mesh generator of surface finite elements is provided. Surfaces of any shape may be modelled. Easy meshing no matter what the pattern of holes or stress concentration points are.

N

Automatic mesh generation. The nodes of neighboring linear and surface elements are automatically coincide.

N

Point insertion for the meshing adaptation around it. Capability for hole insertion in an already produced mesh.

N

Contours concerning the stress resultants, the strains or the computed reinforcement percentage As may be drawn.

N

Any kind of material may be attributed to a mesh.

Analysis Types

All the types of analysis are included:

5

Linear simplified spectral method (Equivalent spectral method).

5

Linear dynamic spectral method.

5

Linear and Nonlinear dynamic time-history method of the response of the structure based on accelerometer graphs, with direct integration of the equations of motion.

Multithreading CPU – GPU accelerated analysis

5

Accelerate the analysis of very large models using either a multicore processor of a pc (CPU) or a graphics processor (GPU) taking advantage of the analysis solver parallelism.

5

64-bit technology for ultimate accuracy and speed.

Loads

N

Unlimited number of loadings: snow, wind, temperature change, impact, fire, etc.

N

All load types are supported, e.g. uniformly distributed forces, concentrated forces, nodal forces, torsional moments, settlement, thermal actions etc.

N

Automatic calculation of masonry loads.

Download Free Trial

N

Automatic generation of all combinations of loads, seismic and / or non-seismic based to EC0.

N

Automatic import and calculation of wind and snow loads according to EC1.

N

Three-dimensional representation, of the load of the structure, on the respective members, for direct supervision and control.

N

Display messages for potential errors, in model geometry of structure and the loads of beams and columns.

Input of slabs and slab loads

N

Automatic recognition of slabs and their respective support conditions.

N

Συνολική ανεύρεση των πλακών με αυτόματο προσδιορισμό των συνθηκών στήριξης.

N

Modeling of slabs of any shape.

N

Input of slabs in total or selectively.

Download Free Trial

N

Automatic calculation of thickness based on control of slenderness.

N

Input of ribbed slabs (Zoellner, sandwich).

N

Input of slabs in total or selectively.

N

Display of yield lines and automatic attribution of slab loads to respective bearing beams.

Analysis – Seismic design – Checks (EC8)

=

Spectra design and checks based on EC8 and national annexes. Ability to import spectrum from the user.

=

Categorization of the structure model based on regulations provided in EC8.

=

Carry out all the checks provided by EC8 (regularity in plan and Elevation, construction type, etc.) and the national annexes.

Automatic creation and calculation of load combinations for both limit states (ULS and SLS).

Περιλαμβάνονται επίσης οι διατάξεις και οι έλεγχοι του αντισεισμικού κανονισμού του 1959 καθώς και των πρόσθετων διατάξεων του 1984 με ορθογωνική και τριγωνική κατανομή του σεισμού.