VERIFICATION EXAMPLES FOR SCADA Pro

Software Verification Examples for SCADA Pro 18 A2.5. Three Dimensional Concrete Structure Problem Description A dynamic analysis of a three dimensional concrete structure is presented in this example (Figure 2.5.1). Geometry, Properties and Loads The cross section of vertical beam members (columns) is square 50cmx50cm and of horizontal members is rectangular 30cmx60cm.The foundation of the structure is strip footing with dimensions 30cmx100cmx100cmx50cm. Modulus of elasticity and Poisson ratio of the material is 29GPa and ν=0.20, respectively, while the ground stiffness is 300kPa/cm. Two cases of dynamic analysis have been employed, taking into account the self-weight of structure (ε c =25.0kN/m 3 ). According to the first one, no diaphragms are considered in any floor while on the second case diaphragms in every floor are employed. Figure 2.5.1. Three Dimensional Concrete Structure.