SCADA Pro PRESENTATION

satisfied or failed. Z: corresponds to the exceedance of the critical load e: symbol corresponds to the exceedance of the load eccentricity σ: corresponds to the exceedance of the normal stresses. • SCADA Automatically Calculate the thickness of the slab • SCADA AUTOMATICALLY DESIGN all the structural members and displays check results on each one * • Failed Design alerts : The indicated results show the reason of failure. • Red: Failure caused by biaxial bending. • Pink: Failure by Shear/Torsion OR exceedance the ductility level. • Orange: Not sufficient anchorage. • Cyan: All design checks are verified. BEAMS-COLUMNS FOOTINGS when thickness is satisfied when slab thickness is less than slenderness thickness SLABS M: Failure by biaxial bending. S: Failure by Shear / Torsion. st: Dense Stirrups. lbd: Not sufficient anchorage d: Exceedance of the ductility index ν d > 0.65 ρ max : Exceedance of 4% steel reinforcement ratio. UNIQUE FEATURES IN DESIGN & CHECKS SBC 304