SCADA Pro OVERVIEW

" Valuation and redesign of constructions based on the KAN.EPE. New Analyses based on the requirements of CAN.EPE. All analyses for the valuation of an existing building according to CEE (Anelastic - Pushover, Linear dynamic method of time history of the response of the structure, Elastic with the method of coefficients q and m) are included. Full printout of strength ratios per element. Checking of plagiarism or sanding failure. Calculation of shear ratio on the basis of the CEE and analytically on the basis of the intensive quantities. Linear and nonlinear dynamic method of time history of structure response based on accelerograms and dynamic loads, with direct integration of the equations of motion. Graphical visualization, in real time, of the motion of the deformed structure. Ability to insert and control wall fillings according to the provisions of the KAN.EPE. You are given the possibility of automatic insertion of wall fillings, in accordance with the provisions of the CEE. The simulation of each facade is done automatically with two diagonal bars and the choice of material is made from a rich library of ready-made masonry. You are also given the possibility to configure and compose your own masonry from its individual materials. Even after are introduced, they run additional analyses on the same model, without being taken into account, for comparison purposes. All required checks in terms of deformation are performed with a corresponding automatic removal of tangential elements from the model. Restoration of the cross-section and reinforcements according to the CEE with all the materials provided: • Substructures: sheathing made of cast and shotcrete, fibre-reinforced polymers, steel plates. • Beams: Layers of cast or shotcrete reinforced concrete, steel plates, fibre- reinforced polymers. The insertion of aids is done the editors quickly, easily, and supervisor-friendly. The program automatically calculates the new strength moments based on the interaction diagrams of the composite cross-section for different materials (old - new material). Strength values are calculated for any value of the axial force N. An automatic calculation of the number of bolts with the corresponding construction checks is also performed. • Complete library of restoration materials and strengthening the company Sika, Sintecno, EM4C. • Design details and full printout of all the checks provided by the C.E.N.E. with tabulation of the results and supervisory diagrams of the cross- sections. www.scadapro.com 03