SCADA Pro BROCHURE

Assessment and redesign of existing structures based on EC 8 part 3 (Strengthening and retrofit of buildings) « New Analysis Methods based on the requirements of Eurocode 8 part 3 It includes all analysis methods proper for the assessment of existing structures according to Eurocode 8 part 3. (Nonlinear static analysis–Pushover analysis - Linear dynamic timehistory analysismethod, linear static analysiswithgormcoefficient method). Full Calculations Printout of resistance ratios per structural element. Check of ductile or brittle failure. Calculation of shear ratio based on Eurocode 8 part 3 and analytically based on internal forces. Rehabilitation of a cross section and the steel reinforcement according to Eurocode 8-3 considering all required materials: • Columns: jacketing of cast-in-place and gunite, fiber reinforced polymers (FRP), steel laminates, and confinement. • Beams: Layers of cast-in-place and gunite, steel laminates, fiber reinforced polymers (FRP). The definition of the reinforcement is performed through the editors quickly, easily and under full control by the user. The software provides automatic calculation of the moments of resistance of the new cross-section according to the M-N interaction surface of the composite cross section for different materials (i.e. old - new material). Moment resistance values are calculated for any value of the axial force N. In addition, an automatic calculation of the number of bolts is performed considering the corresponding design checks. • Integrated library of rehabilitation and reinforcement materials of Sika AG. • Incorporation of the fischer holding GmbH & Cos’ software for calculating chemical and mechanical anchors. • Detailing drawings and full printouts of all the calculation checks required by Eurocode 8 part 3. 14 www.scadapro.com