SCADA Pro BROCHURE

Analysis and design of seismically resistant structures (EC 8) « • Design according to the ductility classes (DCL, DCM, DCH). • Seismic analysis considering horizontal and vertical response spectra. • Manual modification of the response spectra, SRSS, CQC method. • Structural analysis of all type of structural systems; Dual system (frame or wall equivalent), ductile of coupled or uncoupled wall system, inverted pendulum system, torsionally flexible system, system of large lightly reinforced walls. • Automatic calculation of the behavior factor q and the multiplication factor au/a1. • Regularity criteria for buildings with recesses in elevation and in plan view. Second order effects check. • Geometric requirements and interstorey drift limitations. • Automatic generation of seismic load combinations. • Check of beam - column joints. • Beam, truss, 2D and 3D finite elements. • Analysis for composite structures (concrete and steel). • Parametric definition of the sum of the effective modal masses with respect to the eigenvalues considered. • Automatic generation of different analysis scenarios based on predefined design methods (EC8, NTC2008, etc.). • All analyses for the assessment of the existing buildings according to EC8-3 are considered. (Nonlinear static analysis-Pushover analysis, Elastic static analysis with the q or m coefficient method). Complete print out of resistance ratios per element. Check of ductile or brittle failure. Calculation of shear ratio according to EC8-3 and analytically using internal forces. • Linear and non-linear time history direct integration analysis of structures. Real-time graphic visualization of the motion of the deformed structure. www.scadapro.com 13