MODEL CHECKS & SIZING MESSAGES

SCADA Pro - Controls & Messages 8 • Beam 31: The width of the beam ( bw = 0.65m) is greater than min( 2∙bc , bc + hw )=0.52m. (EC8-1, 5.4.1.1.2.1(3)P) • Beam 31: The ratio of the beam span l to the cross-sectional height hw is less than 3 (l/h=2.74). The beam is considered to be high-topped. (EC2-1-1, 5.3.1(3)) EC8 - CIP: • Beam 31: The ratio of the beam span l to the cross-sectional height hw is less than 3 (l/h=2.74). The beam is considered to be high-topped. (EC2-1-1, 5.3.1(3)) • Beam 31 - Node 52 end: the eccentricity of beam axis with respect to the column's C.B. (e=0.20m) is greater than bc/4 ( bc=0 .15m) (EC8-1, 5.5.1.1.2.1(4)) • Beam 31: The width of the beam ( bw = 0.65m) is greater than min( 2∙bc , bc + hw )=0.52m. (EC8-1, 5.5.1.1.2.1(5)P) • Beam 31: The width of the beam ( bw = 0.12m) is less than 200mm. (EC8-1, 5.5.1.2.1.1(1)P) • Beam 31: The ratio of height to beam section width is greater than 3,5 ( hw /bw =4.74) (EC2-1-1, 5.9.3, Fig. 5.40b).