B. COLUMN REINFORCEMENT DETAILS

28 CHAPTER B: COLUMN REINFORCEMENT DETAILS The Connector Details field includes the Dimensions from which you select the new diameter, and the Distances. By zooming in on the connector detail within the design environment in mode , the connector turns red and the field is updated with the connector details, indicating the diameter and individual distances between them throughout the column height, critical heights and remaining height. 3.1 How the operations on the fasteners are performed : To modify a connector . select the command . the status is activated . select connector . select the new diameter, write the new distances, select new type . press right click. To insert a new connector . select the command . the status is activated . select diameter, distances and type . left-click to show the bars enclosed by the new connector. The drawing is automatically updated and a new clip detail is created that shows all its characteristics. To delete a connector . select from the horizontal bar the . the status is activated . left-click to delete the connector through the detail of the column cross-section. . with a right click you activate the