A. DETAILS OF BEAM REINFORCEMENT

CHAPTER A : 'DETAILS OF BEAM REINFORCEMENT' 9 Α. The first criterion is the width of the support, as defined by the reinforcement parameters of the beams. If this exceeds the value of the max support width (see figure 1), then separate support bars are installed per side. If the width of the support is less than the max width, then a common iron is placed for the whole support (see figure 2). NOTE: Changing this parameter after the creation of the perimeters of the beams requires deleting and recreating them. Β. The second criterion has to do with the width of the beams in the support. If this width is different for the two beams, then separate additional support bars are installed. If not, a common iron shall be fitted. CONCLUSIONS: A joint is only placed if both of the above criteria are met: A. Support width< max width, in parameters B. Same beam width