A. DETAILS OF BEAM REINFORCEMENT

CHAPTER A : 'DETAILS OF BEAM REINFORCEMENT' 54 - for supports the critical length of the beam, - and for the opening the remaining length. This length is the default length of the reinforcement. Thickness is the thickness of the reinforcement and is filled in by the user • In the field "Section Strength" With the "Original" option the moment of resistance of the original cross-section is calculated while with the "Reinforced" option the moment of resistance of the reinforced cross-section is calculated. • Data input in the " Upper foot - Lower foot" modules - The option "Do not participate in the biaxial bending check" excludes this concrete layer from the calculation of the ultimate section modulus. - For the length , the same applies as for the sheath. - The width of the laminate is initially calculated as the width of the side. - The anchor length is a mandatory field and the program initially enters a value which can be modified by the designer. - The number of layers is the number of layers of reinforcement.