A. DETAILS OF BEAM REINFORCEMENT

CHAPTER A : 'DETAILS OF BEAM REINFORCEMENT' 49 IMPORTANT OBSERVATIONS ON THE MANTIS SHRIMP MOTHS In order to calculate the required sheathing bolts in beams and substructures, the following steps are required: 1. Insert the cloaks 2. Perform the analysis of the Rule (elastic/elastic) 3. In sizing, you call the combinations of the above analysis 4. Open the reinforcement details of the elements that have sheaths and in the Sheaths field do a Calculation Cloak projectiles in Dokus: In beams, for both flexural and shear reinforcement, the bolts are usually placed in a row. There are 2 symbols: c s C: distance of the projectiles from the ends S: distance between the projectiles Ct: the distance of the projectile in relation to the width of the beam Cl: the distance of the 1 th bolt in relation to the length of the beam St: the distance between the bolts in relation to the width of the beam (it is zero unless there was more than one row) Sl: the distance between the bolts in relation to the length of the beam • Addition of new reinforcement materials from Sika and EM4C In the new version of SCADA Pro, new materials have been added to reinforce and protect existing structures and the lists of existing materials have been fully updated and adapted. Now, when the designer selects the reinforcement material, all technical characteristics, including its thickness, are automatically taken into account. For all materials there is also a link to the corresponding technical brochure of the company producing it. The designer has direct access to the Sika, EM4C and SINTECNO library via the buttons displayed in the windows.