A. DETAILS OF BEAM REINFORCEMENT

CHAPTER A : 'DETAILS OF BEAM REINFORCEMENT' 40 OBSERVATION: The process of initial placement or changing the parameters of the existing reinforcement is iterative and includes the following steps in summary: 1. Armament details 2. Choice of aid 3. Default 4. Placement of reinforcement 5. Throughout the cross-section 6. Calculation of endurance moments 7. Checks 8. Issue 9. Analysis 10. Choice of scenario 11. Script execution 12. Combinations 13. Checks 14. Issue 15. Show l and print aid (again from the beginning) 1. Armament details 2. Choice of aid 3. Default 4. Introduction of different reinforcement elements 5. Calculation of endurance moments 6. Checks 7. Issue 8. Analysis and the process is repeated... You select the opening either graphically, by left-clicking on the opening of the beam within the drawing area, or numerically by setting the opening number in . Within the "Arming Details", the beam is always displayed with its insertion direction. In order to correctly locate the beam you want to reinforce, it is advisable to display the numbering of the beams and the local beam axes in your carrier and within the editor select the beam you want to reinforce with its number. To determine the left and right support consult the direction of the local x-x axis which determines the start and end of the beam within the editor regardless of how the beam looks in plan view.