A. DETAILS OF BEAM REINFORCEMENT

CHAPTER A : 'DETAILS OF BEAM REINFORCEMENT' 29 The fasteners can be Normal or Bidiagonal, if they are selected as the arming mode for the oblique reinforcement (see the below figure below). Regulars can be 2-segmented, 4-segmented, etc (multiples of 2), while bidiagonals will always have 2 segments. dL= distance of the first fastener from the left cheek dR= distance of the first connector from the right cheek You have the possibility to modify existing clips or insert new ones. You can standardise the clips in each opening by selecting . So you enter the features only , at the opening, and they apply to the supports as well. If the selection of oblique reinforcement has been made in the dimensioning parameters, then when selecting the "bidiagonal" type, the right leg is activated