9. RESULTS

CHAPTER 9 "RESULTS" 18 It is clarified that the armature: - now refers to the universal axes and - the mounting address is RIGHT on the corresponding axis we are referring to** ( **NOTE: FROM SCADA Pro20 Build:2020.1.2.2432 AND AFTER THIS RELEASE NOT APPLICABLE) For vertical surfaces: X: is the reinforcement perpendicular to the local x Z: is the reinforcement perpendicular to the local y OBSERVATION: Prerequisite: 1. preceded by the determination of the main direction of reinforcement, is the determination of the direction for the vertical grids. -For vertical grids // on the X-axis : I select the grid and from the list and the column ''s'' is updated, respectively, -For vertical grids // on the axle G : select the grid and the from the list and the column ''s'' is updated, respectively. For meshes that are not // on either X or Z if I do nothing the program will project resulting armature by reducing it to the 2 main axes. 2. Every time you define a 3D surface grid, to automatically redefine the correct direction of the surface elements, you ALWAYS select the use of the " Auto " command