8B. ANALYSIS PART 2

CHAPTER 8B 'ANALYSIS' 9 HALYVAS: When determining the strengths of Steel (main & fasteners) there is the additional presence of Optical Recognition . Selecting Visual Recognition opens the list of steel grades you select and automatically fills Fym . All other values are automatically filled in and with the Update the Constants for the Existing Steel (main & fasteners) are calculated. 3 h revision of the EIA CIP For steel, the material safety factor γs now depends not only on the material data reliability level but also on the detail data reliability level. These two new options have therefore been introduced: The option Laboratory Values CANEPE 2022 was also introduced, where the cs is derived from a combination of the two SDSs and the option Absent Values CANEPE 2022 was also introduced where the requirement for steel is that the material SDS is satisfactory (rather than tolerable which was in the previous revision). After defining the above, do your initial sizing and then modify and adjust the reinforcement from the Beam and Column Reinforcement Details respectively.