8B. ANALYSIS PART 2

CHAPTER 8B 'ANALYSIS' 52 • In the " Data Reliability Level " option, you select the corresponding SDSs. for the existing building according to the provisions of the CEE. This choice affects the coefficient of permanent loads γg on the basis of which the building will be solved. • Finally, by activating the option " 2nd Order Influence Check (i) " we choose to perform the relevant check. Then, select the command FRAME The EIR provides a minimum tolerable target on the building's significance category based on the table below: 3 h revision of the 2022 EIA. In the new EIA, more seismic hazard categories are introduced (9 in total from 2 before), the term seismic class is introduced, as well as a new method of assessment and redesign (which can be followed as an alternative to the one in force until now). Seismic class is the maximum rating or redesign target for a given level of performance. It is derived from the combination of performance level and αg rate. The seismic classes for performance level B are considered as basic seismic classes.