7. LOADS

CHAPTER 7 "CARGOES" 9 At the top you select the Load and the Group to which the loads you will set belong. Then enter the values of the loads for each type and type of plate. • You can enter the load values, either by typing the values for each type of plate separately, or by typing a value (kN/m2) in the field and then pressing the button, this value is passed to all fields. • You also with the option To import predefined load values from an existing library of values. Selecting this option displays the following dialog box: Having selected the Permanent Loads load in the "From Library" list, you select the predefined load (e.g. MARLE) and the load of the marble coating is displayed. Having selected the Mobile Loads loading, you select one of the categories defined by the Eurocode depending on the use (A, B, C1, C2, etc.) to automatically enter the corresponding loads (without coefficients). Similarly, you can define your own loads by giving a name to the "Description" field, entering a value in the "Load (kN/m2)" field and pressing the button, the load is permanently stored in the library.