Table of Contents 1 40

5. TOOLS

The 5th Module is called "TOOLS" and includes the following 6 groups of commands:	3
IMPORTANT OBSERVATION:	3
1.1 Renumbering	4
OBSERVATION:	4
1.2 Fixed points	5
How to use:	5
OBSERVATION:	5
1.3 Beam segmentation	5
OBSERVATION:	5
EXAMPLE	5
1.4 Beam on beam	6
OBSERVATION:	6
EXAMPLE 1	6
EXAMPLE 2	7
EXAMPLE 4	7
1.5 Beam-post connection	8
OBSERVATION:	8
How to use:	8
1.6 Beam breakage	9
OBSERVATION:	9
1.7 Beam consolidation	9
OBSERVATION:	9
1.8 Pole adaptation	10
EXAMPLE:	10
EXAMPLE	11
3.1 Calculation	12
OBSERVATION:	12
OBSERVATION: (1)	13
FINITE ELEMENTS	14
3.2 Beams->Poles	16
3.2.1 Conversion of beams to columns	16
EXAMPLE:	17
3.2.2 Model Smith	19
OBSERVATION:	19
3.2.3 Model diagonal bars	19
OBSERVATION:	19
OBSERVATION: (1)	20
3.2.4 Change rigid offset	20
DEFINITIONS:	20
3.2.5 Piles	20
circular reinforced concrete piles.	20
OBSERVATION:	21
OBSERVATION: (1)	22
OBSERVATION: (2)	23
4.1.1 Break	23
OBSERVATION:	24
4.1.2 Section	24
4.1.3 Change of reference	24
4.1.4 Redefining reference	24
OBSERVATION:	25
4.1.5 Members' freedoms	25
OBSERVATION:	27
4.1.6 Consolidation of members	28
4.1.7 Surface rod connection	28
5.1.1 Replace	29
5.1.2 Identification	29
5.1.3 Identification of Rod-Surface nodes	30
5.1.4 Commitment of the Stick-Surface Nodes	30
5.1.5 Consolidation	31
5.1.6 Metal Control	31
OBSERVATIONS:	31
OBSERVATION:	33
OBSERVATION: (1)	34
6.1.1 Finding Length, Angle	36
6.1.2 Finding Area, Perimeter	36
6.2 Perasia	36
6.3 Performance of Properties	38

RkJQdWJsaXNoZXIy NTIwNzc=