5. TOOLS

CHAPTER 5 "TOOLS" 37 EXAMPLE 1 Assume line (e) and the 80x50 pole. Activate the command. Select the pole by left-clicking on the side (1) and after line (e). The post is placed as in figure 1. Selecting the pole by left-clicking on the side (2) and then the line (e), The pole is placed as in figure 2. EXAMPLE 2 Let's take the beam (T1) and two 30x60 poles. Activate the command. By selecting the beam by left-clicking on a central point on the top side, and then the top side of the two poles, the beam is positioned as in Figure 1. By selecting the beam by left-clicking on the top side but at a point near the left post, and then clicking again on the beam at a point near the right post, you get the result shown in Figure 2. EXAMPLE 3 Suppose you have placed two circular columns and a beam connecting them. You now want to bring the passing beam towards the circular column, as shown in the second figure.