2. MODELING

CHAPTER 2 "MODELLING" 21 3.2 Pedilodocus Select the cross-section and in the dialog box: Here are the parameters of the pedicle. More specifically: • " Cross-section ": you choose the quality and shape. • " Geometry ": enter the dimensions of the cross-section based on the graph showing the shape of the footbridge. In the window, the cross-section of the pediment is formed based on the geometry you have selected and the dimensions you have entered. Here you also see the local yy and zz axes of the cross-section. The key : offers a three-dimensional representation of the pediment. By pressing and holding the left key and moving the mouse, the plane rotates and you can see the perimeter of the perimeter of the perforator. • The " R.Offsets " option enables or disables the existence of rigid sections in the beams. ATTENTION: To insert footings under the basement walls you must disable " R.Offsets " and " Autotrim ". • The option indicates the way of placing the pedestal, i.e. which terrace will be chosen for its design. NOTE: For the placement of the pedestals, the same applies as for the beams.