2. MODELING

CHAPTER 2 "MODELLING" 115 The "Load Performance" field refers to the wind and snow loads according to Eurocode 1 (Loads>>Wind-Snow Loads). When the tethers and the snow tethers are active, the program automatically allocates the wind and snow loads to them. You will find the " Wind-Snow Loads " automation in detail in the relevant chapter. "Save" to save the construction you set. You can create a folder where you can save the constructions you create through the standard constructions and build your own library of constructions that you can call upon in a future study. It is now possible to preview the files you create and save in standard constructs. "OK" and the 3D photorealistic model of your study will appear in the SCADA Pro interface. Turn off the photorealism to display the physical and/or mathematical model and using the program's tools, make any modifications you wish. In the same study you can use more than one standard construction, of the same or different material, to create the most complex studies. Select the insertion point, set the "standard construction", save and "OK". Repeat the same procedure to insert a second standard construction on top of the first one. 6.2.2 Mesh, concrete frames, wooden frames Similarly you work by selecting any other type of linear construction from the list. Select the base geometry of the design, member cross-sections, repeats and the frame is imported into the interface, referencing the default insertion point.