BASICS

CHAPTER 1 "BASICS" 4 1.1 Line Command to draw rectilinear segments . Line : Select the command and set the start and end point: Graphics: left-click to set two points within the desktop, or With coordinates, (absolute or relative): left click to set a point on the desktop, then select the command and enter the absolute coordinates or the command to enter the relevant coordinates Activate the checkbox , set the relevant coordinates and move the mouse to a point (given point). A box will show you the point with the relative coordinates you set, relative to the given point. Polyline : Command to draw polylines. Select the command and follow the previous procedure (see "Line"). 1.2 Circle Command to draw circles . Centre-Actina : Graphics: Set a point on the desktop that will be the center of the circle and a second point to set the radius, With the coordinates: Set a point on the desktop and select the command or to specify the end point of the radius of the circle. Three Points : Graphics: You successively define three points on the perimeter of the circle, With the coordinates: The definition of points can be based on absolute or relative coordinates or on the points of attraction of objects (Osnaps). Set the first point on the desktop and select the command or .