BASICS

CHAPTER 1 "BASICS" 27 Parallel Transfer : With the " Parallel Transfer " command you can transfer a level from one position in the station ranking order to the next position. Select the level you want to transfer, select "Parallel Transfer" from the task menu and then select the "Update" button. The level moves one position down. This command is useful in cases where you want to insert a level between other stations and the original creation of this level was not in the correct position but at the end of the list of stations. Delete Levels : the operation of the " Delete Levels " command at the end of the task list is similar to the previous deletion, except that only the level is deleted and not the elements belonging to it. Each level after "Update" is entered in the list divided into 6 columns. In addition to the number, anonymity and altitude, each level is characterized by: " D.L.P. " (Diaphragmatic Plate Mode), " Equidistance " and " 3D " with the respective symbols active or inactive . To modify these 3 features use the commands on the right. First select the level or levels (ctrl and left key or "Select all") and the command: " I.L.P. " for plates with a diaphragm function or " Without B.O.D. " " Equalize " to lock the altitude , which means that any new member will be inserted at that altitude regardless of where the insertion is made. " Show in 3D " in order to display the elevation in the 3D view of the model " Hide in 3D " in order to hide the level in the 3D view of the model. OBSERVATION: It is not possible to import stations with the same altitude Connection of Column Nodes with Surface Grid SCADA Pro allows the collaboration of linear and surface elements in the same interface. The need for binding between them is therefore born. At the bottom of the window there is the choice of the way of connecting the nodes of the columns to the surface grid, for the selected level, by selecting one of the three ways, connecting the nodes either by simple dependency or by connecting through tie rods. 1 2 3 4