11. FORMWORK

CHAPTER 11 'FORMWORK' 5 Entry : Activating this command opens a dialog box similar to the one shown above, where the wood type you are editing is entered as a drawing file of the program. The first entry, even if made with the "Entry" option, is made as ¨San entry¨ (see next paragraph). Listing as: You register the project with a new name. This option is useful in case you have made modifications to the xylotype and you want to register the modified drawing with a different name than the one it already has. SetUp printer : Enabling this option opens the Setup of the default printer from the Windows Control Panel to confirm or modify its parameters. Print : this option prints your designs on the printing medium installed as the default in Windows. In the dialog box that opens, you specify parameters concerning the thicknesses of the lines to be printed, depending the color of these lines on your screen. The group colors to the left and outside the box titled "plotter" refer to the colors you see on the screen. These will match the colors and thickness will be printed on the paper and are shown in the corresponding columns of the box titled "plotter".