11. FORMWORK

CHAPTER 11 'FORMWORK' 49 How to use : 1. You activate the command and set the parameters of the reinforcement to be placed as described above. 2. Pressing the button closes the dialog box and the program prompts you to define the lines for the placement of the reinforcement, depending on the type of reinforcement. 3. After you have set the last line, the armature appears on the screen and the program asks you to specify the point where it will be placed. The movement of the pointer on the screen is followed by the drawn armature until you indicate the positioning point with the left mouse button, at which point the armature is fixed there. If you have enabled the parameter , before defining the lines for placing the rebars, you must indicate a straight line to define the direction in which the rebar will be placed. The reinforcements are designed as single entities (blocks). Fields: In the dialog box that opens, type : : In the first field you give the diameter of the bars and in the second the distance between them, ή : In the first field you give the number of bars and in the second field the diameter their. The dialogue box is closed by pressing on the field or cancelled by pressing on the . How to use : 1. You are activating the command "Lumber Tools>> Armaments>> Field Armaments ". 2. The "Field Armaments" dialog box opens, where you type the details of the armament you want to place. 3. Press the field and the dialog box closes. 4. Indicate with the mouse the line from the sides of the pedestal to which the reinforcement will be placed parallel, which will be drawn with the same length as the length of the side of the pedestal you indicated. Moving the pointer moves the reinforcement visibly