11. FORMWORK

CHAPTER 11 'FORMWORK' 47 • the outer face of the first bearing beam of the plate on which the reinforcement is to be placed. • the outer face of the second bearing beam of the plate on which the reinforcement is to be placed. • the opposite boundary of the second adjacent plate (4 straight lines) Amphitheatre slab with continuity on one side of its seat with another amphitheatre slab. You point with the mouse: • the opposite boundary of the adjacent plate • the outer side of the common bearing beam of the plates • the outer face of the second bearing beam of the plate (3 straight lines) Uncontested slab with continuation on both sides of its seat with projections. You define in order: • the free end of the first sheepskin • the outer face of the first bearing beam of the plate • the outer face of the second bearing beam of the plate • the free end of the second projection (4 lines) Amphitheatrical slab with a continuation on one side with a projection. Define: • the free end of the sheepskin • the outer face of the first bearing beam of the plate • the outer face of the second bearing beam of the plate (3 straight lines) Amphibious slab with a continuation on one side with a projection and on the other side with an amphibious slab. You define : • the free end of the sheepskin • the outer face of the first bearing beam of the plate • the outer face of the second bearing beam of the plate • the beam of the adjacent amphibious slab (4 straight lines) Triple plate with continuity to the bearing side with amphibious plate. Indicate: • the boundary of the adjacent plate opposite their joint bearing. • the outer face of the bearing beam of the truss • the free end of the tricuspid (3 straight lines)