11. FORMWORK

CHAPTER 11 'FORMWORK' 46 Type : Select the type of reinforcement to be inserted. (top down, /back). The corresponding comment will be written right of the armaments. If you select , will be written, and you can type any comment you wish up to 10 characters in the corresponding field. : Enter the angle of inclination of the text with respect to the horizontal direction (positive or anti-weather). : The Beam Armour text is placed parallel to an existing direction of the design, which you indicate immediately after closing the "Beam Opening Armour" dialog box. By selecting the "Angle" option is automatically disabled, so any value entered in the field is NOT taken into account. Plate Opening: In the dialog box that opens, you specify the data of the plate reinforcement you want to place: Iron type : Here you can select the type of iron according to the type of plate and its geometry, by pressing with the mouse on the corresponding circle. In particular : Reinforcement of an amphibious plate (in the direction in which you will place the reinforcement) without continuity on either side of its supports. For its placement you will indicate the outer faces of the bearing beams (2 lines). Amphitheatre slab with continuity on both sides of the action with amphitheatre slabs. You will indicate in order : • the opposite boundary of the first adjacent plate