Table of Contents 1 68

10D. DIMENSIONING PART 4/4

The 10th Module is called "DISCUSSION" and includes the following groups of commands:	3
1.1 Masonry Control	4
OBSERVATIONS:	4
1.2 New masonry building (EC6)	6
OBSERVATION:	7
OBSERVATIONS:	9
1.2.1 Control Simple	10
OBSERVATION:	10
1.2.2 Check	11
Interlayer masonry	11
Bending within level	12
1.2.3 Control Total	13
Show reasons for exhaustion with Color Gradation	17
⮚ New masonry building (EC6)	17
OBSERVATION:	21
2.1 Check	22
2.2 Control Total	23
Life Protection (B):	25
Quasi-Collapse (C):	25
2.2.1 Incorporation of the provisions of the CPR	26
OBSERVATION:	26
2.2.2 In-plane bending and shearing	26
2.2.3 Bending out of level	26
❖ For Performance Level A, checks in terms of forces	26
1.1 With an inactive area visa	27
1.2 With an inactive area visa	27
OBSERVATIONS	28
2. Parallel to the vertical joint / Perpendicular to the horizontal joint	30
2.2 With an inactive area visa	31
❖ Performance Levels B and C checks in terms of deformations OBSERVATION:	33
3.1 At the same time the vertical joint	34
3.2 At the same time in the horizontal joint	35
2.2.4 Masonry reinforcement	36
• With metal rods	36
2.2.5 Reinforcement with mantle	38
Masonry with concrete mantle - Remarks:	40
2.2.6 Reinforcement with Inorganic Matrix Fiber Mesh (IAM)	41
2.2.7 Reinforcement with metal rods	44
❖ EXAMPLE:	45
IMPORTANT OBSERVATION.	50
2.2.8 Strengthening with mass injections and deep grouting	54
• Reinforcement with deep grouting	56
Show reasons for depletion with Color Grading	58
OBSERVATIONS	58
3.1 Reinforcements - M.I.P. KADET - EC8-3 (Resilient)	66
3.2 Valuation of M.I.P. (CEDIT)	68

RkJQdWJsaXNoZXIy NTIwNzc=