10D. DIMENSIONING PART 4/4

CHAPTER 10D 'DIMENSIONING' 58 Show reasons for depletion with Color Grading ⮚ Valuation( EC8-3) 1. Bending within level 2. Bending out of plane parallel to the horizontal joint 3. Bending out of plane perpendicular to the horizontal joint 4. Out-of-plane bending parallel to the vertical joint (II) 5. Out-of-plane bending parallel to the horizontal joint (II) 6. In-plane bending with reinforcement initial control 7. Bending within level with reinforcement 8. Bending out of plane parallel to the horizontal joint with reinforcement 9. Bending out of plane parallel to the vertical joint with reinforcement 10. Shear with reinforcement with metal bars 11. Shear with IAM reinforcement 12. Tensile with reinforcement with metal bars 13. Tensile with concrete sheathing reinforcement OBSERVATIONS Each pessary and each lintel shall be coloured with a single colour corresponding to the depletion ratio. When the walls are painted, a white outline is drawn around the pins and lintels. At this point it should be emphasized that if the initial characterization is Tensile or eccentricity the program does not make any further checks. In this case the wall is delineated: