10D. DIMENSIONING PART 4/4

CHAPTER 10D 'DIMENSIONING' 35 For the calculation of all the above quantities (angular deflection δed and failure deflection Rd) the distance L shown in the above figures was used 3.2 At the same time in the horizontal joint The angular deformation developed is of the following form The results of the project are as follows For the calculation of all the above quantities (angular deflection δed and failure deflection Rd) the height Ho shown in the figure above was used. In both cases the program finds the two nodes with the maximum and minimum displacement respectively and in the first case δed is the difference between the two displacements by their horizontal distance L while in the second case by vertical distance Ho. The failure rotations are calculated in the same way.