Table of Contents
1
72
10C. DIMENSIONING PART 3/4
The 10th Module is called "DISCUSSION" and includes the following groups of commands:
3
• Part 3/4 COMMANDMENTS FOR RAIL AND WOOD
3
Sizing of Irons
4
1.1 Cross-sectional inspection (Hot rolled)
4
EXAMPLE:
5
1.1.1 Procedure for sizing a layer
6
STEP 1 :
6
STEP 2 :
8
OBSERVATION:
10
1.2 Bending control (Hot rolled)
14
Limit State of Failure
14
Limit State of Functionality
14
OBSERVATION:
14
OBSERVATION
17
OBSERVATION
17
EXAMPLE:
22
Show reasons for exhaustion with Color Gradation
27
IT IS RECALLED THAT:
27
OBSERVATIONS
30
1.3 Cold Rolled Sections
31
DIMENSIONING DOCUMENT
32
• Page 1: General cross-section data 1
32
• Page 2: Active cross-section of cross-section 1 (Part A)
32
• Page 3: Active cross-section of cross-section 1 (Part B)
32
• Page 4: Cross-section level check for the 1th member with cross-section 1
32
• Page 5: Member level check for the 1th member with cross-section 1
32
1.4 Links
32
New Metal Connections
34
EXAMPLE:
36
Graphical display on the 3D vector of the metal connections that have already been dimensioned
39
C:\scadapro\ "Study" \scades_Synd\sxedia
41
Wooden
44
OBSERVATION:
44
2.1 Cross section control
44
2.2 Bending control
46
Limit State of Failure
46
Limit State of Functionality
46
OBSERVATION
49
OBSERVATION
50
EXAMPLE:
51
2.3 Links
53
Online
56
Levels:
59
OBSERVATIONS:
59
Member Connection Eligibility:
60
Made with FlippingBook
RkJQdWJsaXNoZXIy NTIwNzc=