10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 65 - Select the diameter of the screw (or set the diameter of the screw) - Set diameter for the washer (only in case of screw) - Set gap for plug (only in case of a screw) - Give the tolerance of the hole in mm. In the Liaison Order field • With the rectangular arrangement active: You define the number of Lines (parallel to the wood fibres) and Poles (perpendicular to the wood fibres) and the corresponding distances. The shape on the right is updated showing the links as well as the outline of the laminate.