10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 50 where you select the icon with the support conditions of the member and the program enters the corresponding coefficient for the buckling length. OBSERVATION The icons are divided into two groups which are described in detail in the corresponding chapter for metallic cross-sections (See Ferrous>>Sizing of Ferrous>Bending Control ). The third set of parameters concerns the parameters of functionality where you specify whether you want to perform the functionality check, the individual Member Deformation and Node Displacement checks, and the respective upper limits (l/220 and l/150 where l is the length of the element) for these checks. Finally, check the "Torsion bending" option if you want to do this check. When the configuration settings are complete, press the "OK" button and return to the previous dialog box