10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 46 2.2 Bending control This mandate is used to control the members. That is, checks are performed for each member belonging to the specified layer: Limit State of Failure • Check for bending (lateral) buckling due to axial compressive force • Torsional buckling check due to bending moment. • Check for torsional bending due to the simultaneous presence of axial compressive force and bending moment. Limit State of Functionality • Member deformation control • Edge (node) movement control • A prerequisite for sizing is that you called and executed the corresponding combination file in the configuration dialog box Using the command, the following dialog box appears. The check is done per layer. So first select from the list