10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 39 If the geometry errors are overcome, the program will perform the calculations and display all the checks required by Eurocode 3 for the specific connection. In summary you can see the results in the corresponding field. There, in green font, the adequacies will be displayed while in red font the failures of the connection will be displayed. If all checks are sufficient the program will be able to proceed to the registration of the connection as well as the automatic generation of the drawings. Otherwise the process is interrupted and then you will have to change some values of the connection to continue. In the investigation as well as in the issue you can see in text format the results of the checks in detail or in summary. Finally, click on the entry and exit to return to the connection types window. Graphical display on the 3D vector of the metal connections that have already been dimensioned In the new versions of SCADA Pro a very useful tool has also been added, which allows you to see graphically on your metal carrier which connections you have dimensioned. You can see them all in total, or by group of connections, and you can also see which members are participating in each connection! This way you can therefore have a better overview as to which links you have sized, whether you have correctly grouped similar links and finally whether you have correctly selected the members participating in those links. Let's see in detail how the command works: In the edit connections dialog box where all the groups connections I have created are displayed