10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 32 Otherwise, the sizing steps are the same as for hot rolled elements (per layer, member consolidation, bending parameters, etc.). DIMENSIONING DOCUMENT The results of the sizing are displayed either per member or per layer. In the second and more general case the structure of the issue is as follows: • Page 1: General cross-section data 1 Dimensional and property information of the original and ideal cross-section • Page 2: Active cross-section of cross-section 1 (Part A) Active cross-sectional dimension information of N, My and Mz ratios • Page 3: Active cross-section of cross-section 1 (Part B) Active cross-section properties information of N, My and Mz ratios • Page 4: Cross-section level check for the 1 th member with cross-section 1 Endurance tests according to §6.1 • Page 5: Member level check for the 1 th member with cross-section 1 Durability checks according to §6.2 & 6.3 and functionality check §7 • Repeat steps 4 & 5 : In case of several members of the same cross-section within the layer. • Repeat steps 1 to 6: In case of several cross-sections within the layer. The issue per layer can also be extracted when creating the Study Sheet. (See in the User Manual the chapter "Cold rolled sections") 1.4 Links The last chapter of dimensioning for steel structures is the dimensioning of the connections of the structure. Select the command and you have two options to proceed with the sizing of the connections: