10C. DIMENSIONING PART 3/4

CHAPTER 10C 'DIMENSIONING' 21 loading level near and below the symmetry axis of the element and finally the fifth option is a loading level at the lower foot of the element. 3) The third set of parameters concerns the parameters of functionality where you specify whether you want to perform the functionality check, the individual Member Deformation and Node Displacement checks, and the respective upper limits (l/220 and l/150 where l is the length of the element) for these checks. Finally, check the " Torsion bending " option if you want to do this check. When the configuration settings are complete, press the "OK" button and return to the previous dialog box By pressing the " Apply to all members of the Layer " button, the program applies the parameter group you just defined with the default name "Beams" to all members of the "Metal Beams" Layer you had selected. Then you press the "Check Layer" button and the program starts the process of executing the layer for the specified layer "Metal Beams". Beams".