10B. DIMENSIONING PART 2/4

CHAPTER 10B 'DIMENSIONING' 99 ZONE 5 ZONE 5 applies to the ENTIRE section and is active when the reinforcement is made with concrete sheathing. The fields included are related to the placement of the bolts at the interface. The commands in ZONE 5 are as follows: Projectile diameter. Length of insertion of the bolt in the new concrete. Length of insertion of the bolt in old concrete Interaction of the bolt mechanism - hammering mechanism. If fromcheckbox is enabled then the interaction is taken into account. Diameter of the hole in the new concrete in which the plug is placed. The Field is active only on case of interaction projectile - rigging. Characteristic affinity strength between bolt and binder. The Field is active only on case of interaction projectile - rigging. Individual safety factor for relevance. The Field is active only on case of interaction projectile - rigging. Quality of application of the bolt at the construction site. The Field is active only on case of interaction projectile - rigging.