10B. DIMENSIONING PART 2/4

CHAPTER 10B 'DIMENSIONING' 98 Switch between the openings of the section. The active opening is the one shown in the sketch. Diagrams of bending moment and shear moment of the original section (before reinforcement). Diagrams of bending moment and shear moment of the reinforced section. In the case of reinforcement with IOP or Steel plates the diagrams are the same as the original section. ZONE 3 ZONE 3 applies to the ENTIRE section and determines the type of reinforcement (Concrete Sheathing, IOP or Steel Plate). ZONE 4 ZONE 4 refers to the ENTIRE section and includes the definition of the reinforcement materials and the degree of accessibility of the locations where the reinforcement is carried out (KANEPE §4.5.3.2). The commands in ZONE 4 are as follows: Concrete quality in the case of reinforcement with concrete sheathing. Quality of longitudinal reinforcement steel in the case of reinforcement with concrete sheathing. Laminate quality in case of reinforcement with IOP or Steel laminate. Quality of bolts in the case of reinforcement with concrete sheathing. Accessibility grade according to KANEPE §4.5.3.2.