10B. DIMENSIONING PART 2/4

CHAPTER 10B 'DIMENSIONING' 71 5. Slabs-Mesh 5.1 Solving Intersections The "Plates-Grids" field contains the commands related to the solution of the intersections of the plates and the corresponding results, as well as the insertion, deletion, editing, sizing and grading of the plates' grids. to make the resolution of the cuts of the plates. The solution is done in two ways: Overall and Selective. 5.1.1 Selectively for selective sizing of the plates, by pointing them with the mouse at the specific section. By solving the sections, the intensive quantities are calculated and the plates are dimensioned. The program calculates tensile (E) reinforcement (Fe), compressive (TH) reinforcement (Fe') in cm (2). Similarly, it calculates reinforcement bars in the spans, distribution reinforcement in the amphibious slabs, separation reinforcement, additives in the supports and connectors if the slabs are ribbed beams. 5.1.2 Overall for total resolution of all sections of the given level 5.1.3 Selectively (Adverse loadings) for selective sizing of the plates, by pointing them with the mouse at the specific section, taking into account the adverse loads for the calculation.