10B. DIMENSIONING PART 2/4

CHAPTER 10B 'DIMENSIONING' 126 6.7 Automatic calculation of Area Armaments With the window open, select from the menu " Automatic calculation of Area Armaments " the program calculates the additional placed reinforcement required to cover the required reinforcement, always for each area defined. EXAMPLE: For example, for X Down additional Φ14/8 were required which is 19.24 cm2/m with a fitting set of Φ14/15 (10.26) (minimum) + Φ14/8 (19.24) (additional) = 29.5 cm2/m. Obviously the maximum required X Lower reinforcement, always for this particular area, is something less than 29.5 cm2/m. The choice of the additive was based on the original reinforcement parameters (minimum, maximum diameter and corresponding spacings). 6.8 Showing Required Armament (As)