10A. DIMENSIONING PART 1/4

• Support width< max width in parameters • Same beam width The next section deals with the selection of parameters for the shear reinforcement of the beams . First you define the minimum distance in centimetres. Then you determine whether you want the intersection to be received from vertically positioned fasteners, or from obliquely positioned fasteners (45 o) . You then specify the minimum and maximum diameter of the fasteners to be used. NEO! Added the user option to receive the shear either with oblique reinforcement or with biaxial connectors, when this follows from the regulation. Finally, in the options you specify in the support and in the opening respectively the diameter and the distance you wish. If this reinforcement is sufficient, it is installed. If now the minimum reinforcement we have defined is not sufficient, then the program searches for the reinforcement required based on intensity and starts with Φmin: and with a distance greater than .