10A. DIMENSIONING PART 1/4

If this exceeds the value of the max support width (see figure 1), then separate support bars are installed per side. If the width of the support is less than the max width, then a common iron is placed for the whole support (see figure 2). • NOTE: The change of this parameter after the creation of the beam spans requires deleting and recreating them. Β. The second criterion has to do with the width of the beams in the support. If this width is different for the two beams, then separate additional support bars are installed. If not, a common bar shall be fitted • CONCLUSIONS: A joint is only placed if both of the above criteria are met: