10A. DIMENSIONING PART 1/4

1.3.6.3 Armaments - Beams & Brackets For the " Beams " and " Connectors ": Enter the overlap in mm according to the climatic conditions. In the field enter in cm the maximum and minimum desired spacing of the bars inside the beams. Common for scenarios of EKOS-EAK and EUROCODE In the " Body Armament " field: The options " Extend Upper " and " Lower " mean that the reinforcement of the supports will also pass through the opening and will be included in it. Note : In the new version the option of extension is only of a calculative nature, as in any case when there is continuity, the reinforcement will pass to the next opening for anchoring purposes. Then you select the minimum number and the maximum and minimum diameter of the bars of the main reinforcement of the span, supports and stringers.