10A. DIMENSIONING PART 1/4

1.3.6.2 Reinforcements - Supports-Walls Enter the overlap in mm according to the climatic conditions. In the max field : enter in cm the maximum desired distance of the bars inside the poles. In the "Columns-Walls" field : define the maximum and minimum diameter of the main reinforcement in bending to be used in the columns and wall columns. With the "Number of Configurations" option you specify the number of successive different diameters to be used for the reinforcement of the columns and walls respectively. • For example, if you set number of diameters 2, the program will use two more consecutive diameters for the reinforcement of the pole,