10A. DIMENSIONING PART 1/4

In the Lmax (cm) field enter the maximum length of the rod to be used in the reinforcement of the structural elements. 1.3.6.1 Armaments - Plates Enter the overlap in mm according to the climatic conditions. • In the field : type in cm the maximum and minimum desired distance of the bars inside the plate. • In the field "Solid plate armouring": define the main armouring, the additional armouring and the the separation reinforcement and the distances between them. • In the field "Zoellner-Sandwitch-Mixed Plate Armouring": you define the main armouring above and below. Similarly for the beams you define the number of bars and the min and max diameter top and bottom. • In the "Connectors" field: set the minimum distance of the connectors in cm and the diameter/distance to support and opening.