10A. DIMENSIONING PART 1/4

1.3.4 Pillars For EKOS-EAK scenario For EUROCODE scenario The Columns field refers to columns and walls. Select the checks you wish to perform (check the corresponding checkboxes). 1.3.4.1 For EKOS-EAK scenario 1.3.4.1.1 Economic Growth In the field "Capacitive Magnification" the possibility of increasing shear and/or torque during the capacitive check of the nodes is given by selecting next to the corresponding case . In the box next to 'qx' and 'qz' the value of the coefficient q is given, which may be varied in each direction and which is the upper limit of the increase in shear or moment. 1.3.4.1.2 Cranking For the control in "Rotate" check the checkbox: When you have only the "Check" option enabled, the contribution of the concrete is ignored, i.e. Vcd = 0 (i.e., it is assumed that the shear stress received by the concrete is zero) and then the calculation of the connectors is performed. ATTENTION: If both the "Check" and "Pre-check" options are enabled, the program checks if a "Torsion Check" is required.