10A. DIMENSIONING PART 1/4

1.3.3 Beams For EKOS-EAK scenario For EUROCODE scenario In the Beams field, select the checks you wish to perform on the beams (check the corresponding checkboxes): 1.3.3.1 Bend For the check in " Bending " decide on "Axial Force Involvement" by checking or unchecking the corresponding option. enables the designer to set his own price for the minimum reinforcement percentage. • If a value is given then the program will take it into account for the minimum reinforcement, and if the field is left blank, the program takes into account the value of Regulation. 1.3.3.2 Shear For the control in " Shear " decide: • (EAK) you specify the method by which the Shear will be calculated. It is possible to calculate the shear either by the general method (paragraph 11.2 of E.K.O.S.) or by the alternative method (paragraph 11.2.5 of E.K.O.S.), as well as the possibility to receive the cutting force either by fasteners or by placing additional longitudinal reinforcement. • (EC) the angle of installation of the fasteners