10A. DIMENSIONING PART 1/4

Where, choose the quality of the material to be used for both concrete and reinforcement (main, connectors). By selecting a different quality for the concrete, the corresponding coefficients are automatically updated. The new version of SCADA Pro 21 added the possibility of simultaneous definition of two material qualities for the structural elements: new and existing. OBSERVATIONS: In the existing material, the calculation of the final compressive strength is now done automatically based on the corresponding provisions of the CEE. Then, the attribution of the quality of the material to the elements and consequently their classification (New or Existing) is done automatically with their dimensioning and this information is now stored in each member resulting in the complete separation of new and existing elements, which gives great flexibility to the designer for further processing. All three windows (Concrete - Steel main - Connectors) are divided into two sections: 1. NEW (left) & 2. BACK (right) The procedure is the same for all 3 windows in detail: 1. Purely new construction In the case of new construction, the definition of the material is done the same way as , completely ignoring the part of the dialogue box concerning existing material: