10A. DIMENSIONING PART 1/4

OBSERVATION: After you select the command open the window: "Material parameters" Selecting: • The current material parameters: the program calculates the strengths according the selected parameters • The initial ones : the program calculates the strengths according to the initial ones, i.e. with the strengths of disbursement This command was created to overcome the problem that occurred when in a structure we needed to selectively dimension one part of the structure with some strengths and another with different strengths (mixed building), usually due to the construction of the building in different periods of time (additions, arbitrary etc.) Without this option during the recalculation the program read the materials from the current parameters and not from the dimensioning. Now this problem has been overcome by now having the second option. "Parameters for calculation of beam strength moments" If you do not wish to change any parameters, just In case you wish to change the parameters for calculating the strength moments of the beams, select " and you have among the options: Take into account the reinforcement of the sidewalls. If checked, the side reinforcement will contribute to the calculation of the moment of resistance. Take into account the Other Additional Armament. If checked, the additional reinforcement, which is not visible in the graphic, will contribute to the calculation of the moment of resistance.